On a direct comparison of Boost Logic’s manifold with a Greddy, they observed huge power gains while monitoring boost to be identical or lower boost on the Boost Logic Manifold. The gains are even more pronounced when compared to a stock manifold; especially the torque. Engineering the manifold in CAD allowed the use of optimal dimensions and otherwise impossible angles determined to be ideal through fluid dynamics in comparison to a sheet metal intake manifold. Boost Logic aimed to maximize the potential of any engine/turbo setup so that this bolt on is beneficial for any HP package. The plenum size has been specifically calculated and sized for the VR38 to create the highest power gains in comparison to the stock and other aftermarket intake manifolds. The tapered venture funnel runners have been engineered for maximum velocity as air approaches the cylinder. Boost Logic chose to make the intake manifold in one piece to mimic OEM style manufacturing which will have less potential for boost leaks. The tube behind the throttle body flange is 80mm which will easily accept the Greddy throttle bodies or much larger units which will surely be developed in the future.